اشترِ Caliburn Crown M Coil في البحرين
إذا كنت تبحث عن قطع غيار فيب موثوقة لجهازك، فإن Caliburn Crown M Coil من UWELL هو الخيار المثالي. هذه الكويلات (Coils) مصممة خصيصاً لبودات (Pods) UWELL Crown M، وتوفر مقاومات متنوعة تشمل 0.6Ohms، و0.
| أوم | 0.6Ohms, 0.8/0.4Ohms |
|---|---|
| النوع | بودات وكويلات |
| العلامة التجارية | UWELL |
Available ohms
| أوم | 0.6Ohms, 0.8/0.4Ohms |
|---|
5 مراجعات لـ اشترِ Caliburn Crown M Coil في البحرين
يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.
ما هو Caliburn Crown M Coil؟
ما هي المقاومات المتاحة في Caliburn Crown M Coil؟
كيفية تركيب Caliburn Crown M Coil؟
ما سعر Caliburn Crown M Coil في البحرين؟
متى يجب تغيير Caliburn Crown M Coil؟
الأسئلة الشائعة
ما هو Caliburn Crown M Coil؟
Caliburn Crown M Coil هي كويلات بديلة مصممة لجهاز Uwell Crown M Pod Mod. تتوفر بمقاومات 0.4/0.8 أوم توين كويل و0.6 أوم مش كويل لتجربة فيب MTL وDTL ورائعة النكهة.
ما هي المقاومات المتاحة في Caliburn Crown M Coil؟
تشمل Caliburn Crown M Coil مقاومات 0.4 أوم و0.8 أوم في التوين كويل للفيب المنخفض والعالي، و0.6 أوم لـ RDL. يُنصح بقوة 15-18 وات لـ 0.8 أوم، و30-35 وات لـ 0.4 أوم.
كيفية تركيب Caliburn Crown M Coil؟
يتم تركيب Caliburn Crown M Coil بطريقة plug and play سهلة بالضغط في قاعدة البود. تأكد من تبليل الكويل جيداً قبل الاستخدام لتجنب الحرق.
ما سعر Caliburn Crown M Coil في البحرين؟
سعر Caliburn Crown M Coil هو 4.000 د.ب. يتوفر التوصيل السريع في البحرين لقطع غيار الفيب.
متى يجب تغيير Caliburn Crown M Coil؟
غيّر Caliburn Crown M Coil عند ضعف النكهة أو زيادة الحرارة. تستمر عادة أسبوعين إلى شهر حسب الاستخدام اليومي.

محمد صفر (عميل موَثَّق) –
الحمدلله لقيت Crown M coil البحرين عندكم اونلاين، طلبت ووصل خلال يومين سريع للريف. ممتاز للـ Crown M pod، سهل التركيب press-fit ويشتغل مع الـ salt nic 20mg زين. افضل ملف vape جربتها، طعم قوي وما يحرق بسرعة. شراء محلي مريح، توصيل بحرين سريع وثقة كاملة. نصيحة، خذوا الـ 0.8 ohm للـ MTL الي يبي درا محكم.
Dana Jones (عميل موَثَّق) –
If you’re into dense cloud vaping, grab the Crown M 0.4 ohm coils asap. I crank it to 30-35W for DTL and the clouds are insane, way thicker than my old GeekVape ones tbh. That FeCrAl mesh keeps the heat even, no hot spots, and flavor pops huge even after a tank. Press-fit installation is a breeze, just push till it clicks and you’re good. Compared to other dual-coil setups, this one’s consistent cloud production every hit. Been chaining all day and still going strong.
Carlos Green (عميل موَثَّق) –
Tracking my Crown M coil lifespan now, and these things are tanks. Heavy vaper here, 10-14 days per coil before any flavor fade, even with my 3mg freebase mixes. No coil burning issues like standard wire ones I used before – the mesh spreads heat perfect, prevents those early burn spots. Quick weekly maintenance tip: just dry wick it lightly after refills. Cost-wise, like 200 fils per day, total value. Pro-FOCS flavor tech really shines after a week, tastes fresh. Longevity beats everything else I’ve tried.
Jessica Lopez (عميل موَثَّق) –
First time messing with Crown M coils, tried all resistances but 0.6 ohm is my RDL vaping sweet spot at 20-23W. Restricted direct lung feels right between tight MTL and full DTL clouds, great for beginners like me figuring out coil resistance guide. Press-fit clicks in seconds, no tools. Paired with 10mg salt nic, smooth hits all day without harshness. If you’re new, start here – versatile for any style.
Fatima Robinson (عميل موَثَّق) –
Switched to the Crown M 0.8 ohm coil a couple weeks ago and man, it’s perfect for my nicotine salt Crown M setup. I run 20mg salt nic at around 15-18W and get that real cigarette-like throat hit every time, ngl. Before this, my old single-coil pod was leaking and flavorless after a few days, but this MTL vape coil just presses right in, no mess. Tight draw feels so natural, like I’m not even vaping but still satisfying that nic craving quick. Def recommend for anyone doing MTL, especially if you’re coming from disposables wanting something refillable. Lasted me 10 days heavy use already, worth every fils.