Voopoo Drag M100S Kit

Crank up massive clouds and bold flavors with a setup that fires instantly. The Voopoo Drag M100S Kit packs 100W of pure sub-ohm power into a compact tube mod, pairing with the leakproof UForce-L tank for freebase nicotine that breathes and blooms. Direct lung hits land hard. Flavor stays locked.

Voopoo Drag M100S Kit – 100W Sub-Ohm Power in Your Hand

The Voopoo Drag M100S Kit is built for freebase vapers who demand both cloud volume and flavor accuracy. At 90 x 36 x 30mm, this curved zinc alloy tube mod grips naturally, with a matte anti-glare finish that refuses fingerprints. Inside: the Gene.TT 2.0 chip reads your coil in milliseconds, firing at 5-100W across 0.05-3.0Ω resistance range with max output voltage hitting 8.5V. Swap in a 21700 battery for full 100W direct lung capability, or use the included 18650 adaptor and max out at 80W—perfect if you prefer lighter sessions or want faster battery rotation. The kit ships with two PnP mesh coils (0.15Ω TW15 and 0.20Ω TW20), the UForce-L tank pre-assembled, spare glass, silicone O-rings, USB Type-C cable, and battery warning card. No battery included, so grab a quality 18650 or 21700 external cell before firing. The Gene.TT chip handles Smart mode (auto coil detect), RBA variable wattage, four Temperature Control presets (SS316, SS430, Ni200, Ti), and Eco mode to stretch battery life on low-power days. Front multi-lock switch prevents accidental firing in bags or pockets.

Direct Lung Performance and Mesh Coil Mastery

This kit excels with high-VG freebase e-liquids between 3mg and 6mg nicotine strength. The 0.15Ω PnP TW15 mesh coil fires best at 60-80W for maximum cloud output—pair it with 70VG/30PG mixes and you’ll see dense plumes that linger. The cotton wicks cleanly at these wattages, ripping through sweet dessert blends (custard, caramel, vanilla) and fruit profiles (mango, strawberry, peach) without dry hits. If you prefer tighter flavor definition over pure cloud volume, slot in the 0.20Ω TW20 and dial back to 40-60W. The airflow tightens here, concentrating taste while still delivering satisfying direct lung sensation. Top airflow has three adjustable slots—pinch them nearly closed for a restricted RDL draw that mimics a sub-ohm tank, or open all the way for airy, lung-filling pulls. Wicking holds steady on chain vaping; I ran this through eight-hour work shifts on high-VG juice without a single burnt hit. The 5.5ml capacity (2ml TPD variant also available) means fewer refills. Spare glass comes in the box, so swap it out if the first gets cloudy from extended use. Cotton life typically runs 10-14 days depending on e-liquid sweetness and wattage—darker juices with caramel or tobacco notes carbon the mesh faster, so expect coil swaps every 1-2 weeks if you’re a heavy chain vaper.

Battery Life, Charging, and Real-World Setup

Battery runtime depends entirely on your cell choice. A quality 21700 with 4000+ mAh capacity hits 12-16 hours of moderate all-day vaping at 60W. Swap to an 18650 adaptor and runtime drops to 6-10 hours at the same wattage, but rotation becomes feasible—charge one battery while vaping on another. The Type-C USB port charges at 5V/2.5A, so refilling takes roughly four hours from dead. While charging, Eco mode is your friend—toggle it on and the mod limits output to 25W, stretching juice and battery when you’re low. RBA mode is where advanced vapers tweak things: read your coil’s ohm resistance, set precise wattage, and fine-tune airflow. Temperature Control works for experienced rebuilders who wrap custom coils; the chip auto-detects SS316, SS430, Ni200, and Titanium without manual TCR input. Smart mode is foolproof: drop in a coil, fire once, and the chip locks ideal wattage for that coil’s resistance. Beginners should start in Smart. Prime new PnP coils by dripping freebase juice directly onto the cotton slots—wait 30 seconds before powering on to let juice saturate. The 510 thread is universal, so you can mount other sub-ohm tanks if desired, though the UForce-L is engineered for this kit’s power curve. Clean the tank every 2-3 weeks: remove the glass, soak in warm water, scrub the chimney with a soft brush, rinse silicone O-rings and threads, dry completely. Inspect O-rings monthly for cracks; replacements are cheap and prevent leaks. Battery bay on the mod bottom uses a hinged latch—keeps dust out and fires stay responsive. For freebase vapers building serious flavor and cloud rigs, the Voopoo Drag M100S Kit delivers sub-ohm performance, reliability, and coil flexibility without gimmicks.

Pick up the Voopoo Drag M100S Kit from vapeshop.bh and start chasing clouds today.